In order to view this object you need Flash Player 9+ support!

Get Adobe Flash player

Ptfe Products

BJSEAL 1101BJSEAL Style 1101 Lock cord The All-Purpose Valve Stem Packing
Style 1101 is a multipurpose self foaming valve packing made of 100% TFE fluorocarbon. In its un sintered form, Lock cord has a high degree of pliability enabling it to conform to valve stuffing box flaws and irregularities, providing an endless molded packing set. Installation couldn’t be simpler just wind the lock cord around the valve stem, tighten down on the gland nuts, add more material and repeat until stuffing box is full.

Its Feature Are

• Low coefficient of friction
• No valve drag
• Temperature range-240 to 260°C
• Virtually inert to all chemicals
• Non- contaminating
• Molds easily
• Lasts longer
• Easier to install
• Self –lubricating
• Molds easily
• Lasts longer
• Easier to install
• Self-lubricating
• Minimum inventory required
• No waste

Available sizes

Diameter Length
2.5 MM 3/32” 15.0 M
4.0 MM 5/32” 7.5 M
5.5 MM 7/32” 4.5 M
7.0 MM 9/32” 2.8 M

*Any size can be quoted on request

BJSEAL Style 1102(W) Thread Tape - WhitePTFE 1102

Style 1102 is a quick convenient thread sealant made of 100% TFE fluorocarbon. A chemically inert, non hardening, non- contaminating permanent seal able to withstand temperature from -200° C to +190°C .Most PTFE tapes require many wraps of material to seal, not Style 1102, this seals with just two or three wraps. Most PTFE tapes become difficult to unwind, not Style 1102, you can use all of the tape, right to the end of the spool. Style 1102 Superior White PTFE Thread Sealant Tapes can be used with confidence in most thread seal applications. Installation requires clean threads free from oil and grime wrap threads at least 1/8” back from end. Overlap one half a turn, pulling tape in to threads. Break taps and assemble fitting

Available sizes

Width Thickness Length
 12.7 MM (1/2”) 0.075 MM (0.003”) 10 Meter
19.1 MM (3/4”) 0.075 MM (0.003”) 10 Meter

*Any size can be quoted on request


BJSEAL Style 1102(G) High density PTFE Gas Tape-yellow  gas tape

Style 1102 Gas tape is made of soft, pliable, higher density PTFE (polytetrafluorethylene) resins, and with its highest quality, it is easier to install and effect a seal, will not leak due to vibration or severe chemical contact for easily recognition, it can be cream yellow and pink colored with indivisible pigment; and the white tape is 100% PTFE made of, complies with FDA 21 CFR 177.1550 (PFTE) food requirements.

Gas tape is a non-corrosive, low coefficient of friction, odorless that stops leakage through treads. It may be used on stream, salt water, air, fuels, all acids, alkalis and solvent. It also can be used on natural gas, propane or butane and petroleum distillates.
It also meets MLT-T27730A, DIN EN751-3, and BS-7786 standards.

 

Its features are:
• Low coefficient of friction, no valve drag
• Temperature from -200° C to +200° C
• Virtually inert to all chemicals, PH 0 TO 14
• Meet USDA requirement
• Pressure up to 176 kg/cm2
• Hydraulic pressure up to 700 kg/cm2
• Non-corrosive, non-flammable
• Molds easily, lasts longer, easier to install
• Self- lubricating
• Minimum inventory required
• No waste


Available sizes

Width Thickness Length
12.7 MM (1/2”) 0.1 MM (0.004”) 10 Meter
 19.1 MM (3/4”) 0.1 MM (0.004”) 10 Meter
 25.4 MM (1.0”) 0.1 MM (0.004”) 10 Meter

*Any size can be quoted on request

Installation – requires clean threads, free from oil and grime. Wrap threads at least 3mm (1/8”) back from end. Overlap one half turn pulling tape into threads, break tape and assemble fitting, it couldn’t be easier.
oxygen tape green
BJSEAL Style 1102(O) High density PTFE Oxygen Tape- Green
If you're working with oxygen or any other compressed gas then Green P.T.F.E* Tape is the sealant tape of choice for today's most discriminating service technician. Green tape is free of the oily solvent residue used during the manufacturing process. Green tape is manufactured to the maximum possible density making it effective to very high pressures. High density Green thread sealing tape is superior to liquid thread sealants. Liquid thread sealants for oxygen systems based on fluorinated oils are expensive. Green thread sealing tape is cleaner, easier to use and only costs a few cents per joint

Features:
• Suitable for oxygen systems and other gases
• Provides an impenetrable barrier to oxygen at pressures up to (200 bar)
• Wide temperature range. -286°C to to 260°C
• Will not string or shred
• Only a few wraps required
• Meets or exceeds MIL-T-27730-A
• its distinctive green color makes it easy to identify.
  Thickness is 0.1mm

Available sizes

Width Thickness Length
12.7 MM (1/2”) 0.1 MM (0.004”) 12Meter
19.1 MM (3/4”) 0.1 MM (0.004”) 12Meter
25.4 MM (1”) 0.1 MM (0.004”) 12Meter

BJSEAL 1106
BJSEAL Style 1106 Gasket Tape 100%Virigin expanded PTFE Joint sealant.
Style 1106 expanded PTFE joint sealant made from pure, virgin PTFE (polytetrafluoroethylene), which is an expanded form, having homogeneous structure characteristics, so it is industrial available to all type flanges or instruments.

Applications
Piping of wide aperture instrument, flange, gasket, manhole packeting, PTFE wrapped gasket, gasket for tank cover, widely in fields of industrial sealing material for steel works, heavy chemical industry, paper manufacturing, medicine, foods pharmacy, chemical fiber, ships and chemical instrument concerned with petroleum. Tear off the release paper from the back of the joint sealant, stick product to the surface to be sealed, taking care to lap over the two ends, cut to size and you now have the perfect gasket.

Its features are:
• Made by 100% virgin PFTE
• Ph 0 to 14 chemically inert
• It is corrosion resistance for all common chemicals (Except melted alkali metals and fluorine gas at        high temperature)
• Temperature range-240 to 260°C
• Will not contaminate flow material, it is available to foods, drinks, pharmacy, paper manufacture and       chemical fiber

Available sizes

Width Thickness Nominal Pipe Size  Length
3mm (1/8") 1.5mm ½”- ¾” 30M
5mm (3/16")  2.0mm 1” – 1.1/2” 20M
7mm (1/4")  2.0mm 2” – 3.1/2” 15M
10mm (3/8") 3.0mm 4” – 6” 8M 8M
14mm (1/2") 5.0mm 8” – 16” 5M
20mm(3/4") 7.0mm 20”-50” 5M
25mm(1") 10.0mm 60” and over 5M

•Any sizes can be quoted on request

•Round type may also be requested on request

BJSEAL STYLE 1116 GASKET TAPE-100%Virigin PTFE Gasket Tape
Style 1116 Gasket Tape made of belt type, pure, virgin  (polytetrafluoroethylene), which is an expanded form, having homogeneous structure characteristics, so it is industrial available to all type flanges or instruments.


Features

• Made by 100% virgin PFTE
• It is corrosion resistance for all common chemicals (Except melted alkali metals and fluorine gas         at high temperature)
• Seals through a wide temperature range from -240 to 260°C
• Will not contaminate flow material, it is available to foods, drinks, pharmacy, paper                     manufacture and chemical fiber
• Does not creep or creep or cold flow, stable sealing performance at flange and duct made of             glass-lining and FRP
• Non –aging
• Quickly salvage damaged rigid metallic gaskets


Applications
Piping of wide aperture instrument, flange, gasket, manhole packeting, PTFE wrapped gasket, gasket for tank cover, widely in fields of industrial sealing material for steel works, heavy chemical industry, paper manufacturing, medicine, foods pharmacy, chemical fiber, ships and chemical instrument concerned with petroleum.

Available sizes
Any sizes can be quoted on request
Installation instructions

• Select a tape width which is approximately 2/3 the width of the sealing surface.
• Remove dirt, particles, scale and flow materials from the surface
• Lubricate the bolts and the underside of the nuts
• Remove release paper from the adhesive
• Apply tape to sealing surface in whatever configuration necessary, pressing lightly to stick, an overlapping the ends about ½ inches at a bolt holes.
• Tighten the bolts following standard torque sequences

BJSEAL 1126
BJSEAL STYLE 1126 SHEET GASKETING-100%Expaned PTFE Sheet Gasketing
Style 1126 Gasket is made of 100% expanded P.T.F.E by using special process that produces a uniform and highly fibrillated microstructure with a great lot of fibers running in multi direction... These create a soft and pliable, yet very tough gasket that has excellent resistance of pressing, creep relaxation and cold flow. It can seal the uneven and damaged flanges

BJSEAL sheet gasket possess universal resistance against common chemicals , expect melted alkali, metal, fluorine at liquid and gas states, It is free from asbestos and other lung –intruding materials. It meets the FDA requirements doesn’t have any corrosion and is able to be stored without any time limits.

Features:
• 100% pure PTFE
• Good sealability
• Good flexibility
• Highly compressible
• Uniform and highly fibrillated microstructure in multidirectional
• Resistant to creep and cold flow
• Unaffected by common chemicals ph range 0-14
• Non- containing , non-toxic
• Meets FDA requirements (FDA 21 CFR177, 1550)
• Service pressure from vacuum to 3000 psi
• Using temperature from -267°C to 260°C for short time up to 315°C
• Easy to cut and install
• Low compressive load to seal
• Can seal rough or damaged flanges
• Remarks : Applicable fluids
• Corrosive fluid acid, alkali, solvent, waste liquid and oils
• Unapplicable fluids
• Melted alkali metal, fluorine at liquid and gas states

Applications
Can be used in virtually many types of sealing applications throughout industry including:
• Chemical manufacturing
• Food equipment manufacturing
• Pharmaceutical plants
• Petrochemicals production
• Steel manufacturing
• Distilling
• Food and beverage processing
• Pulp and paper processing
• Power generation
• marine industry

Available sizes

Thickness

Sheet Size mm

0,5 mm

1500 x 1500

1,0 mm

1500 x 1500

1,5 mm

1500 x 1500

2,0 mm

1500 x 1500

3,0 mm

1500 x 1500

4,0 mm

1500 x 1500

*Also available in sheet sizes 1500 x 1800 and 1800 x 1800

ANTI-SEIZE TAPES- COPPER- NICKEL- CERAMICANTI SEIZE TAPES

A truly unique product range that protects fasteners against seizure, carbon fusion, corrosion and galvanic pitting. The range of anti-seize tapes can be applied to fasteners to overcome unwanted seizures, breakage, downtime and repair bills. Apply by simply wrapping one layer of tape around the thread. These tapes consist of specially formulated high temperature metallic or ceramic sub-micron particles dispersed through the PTFE matrix. Lubricity while the sub-micron particles act like bearing plates between the male and female surfaces. At high temperatures (>260oC) the PTFE depolymerizes depositing the high temperature particles on the thread surfaces which act like a lubricant during assembly and disassembly.

Advantages in Aggressive Conditions
The tapes also coat and seal threads against dust, corrosive liquids and vapours and prevent fasteners from loosening during vibration and shock loading. Unlike anti-seize pastes or compounds, anti-seize tapes are non-contaminating. They will not run, rub or squeegee off. This makes them ideal in all industries and in particular the food and beverage industries. They are also particularly effective in areas where machinery or fixtures are immersed in or washed by water or other corrosive liquids.
Application
Whether the nut being fitted, or removed, is a coarse or fine thread, or has a large or close tolerance between male and female thread diameter and pitch, it is important that the thread tape is applied correctly, so that it is not pushed off by the nut. Tape should be wrapped with 50% overlap on each previous lap and should be applied as illustrated in the diagram on the right.

Industries Served
Power and Desalination Plants, Water & Sewage, Oil & Gas plants, Marine Industry, Food & Beverage Industry and General Industry.

ANTI-SEIZE TAPE- COPPER
For general purpose anti-seize applications on most types of metal fasteners.
Temperature Rating from –268°C to + 1186°C (-450°F to + 2200°F)

Available sizes

Width

Thickness

Length

12.7MM(1/2")

0.1MM(0.004")

15 Meter

19.1MM(3/4")

0.1 (0.004")

15 Meter

 

ANTI-SEIZE TAPE- NICKEL
For General purposes but particularly effective on stainless steel and aluminum.
Temperature Rating from –268°C to + 1300°C (-450°F to + 2400°F)

Available sizes

Width

Thickness

Length

12.7 MM (1/2”)

0.1 MM (0.004”)

15 Meter

 19.1 MM (3/4”)

0.1 MM (0.004”)

15 Meter


ANTI-SEIZE TAPE- CERAMIC
For General purposes but particularly effective in areas where metal filled tapes are inappropriate.
Temperature Rating from –268°C to + 1300°C (-450°F to + 2400°F)

Available sizes

Width

Thickness

Length

12.7 MM (1/2”)

0.1 MM (0.004”)

15 Meter

 19.1 MM (3/4”)

0.1 MM (0.004”)

15 Meter




Contact Info
world map

BJSEAL ENGINEERING PVT. LTD.


BR1-350, JAI GANESH VISION
AKURDI, PUNE - 411035
MAHARASHTRA, INDIA.


Phone :+91-20-27483060

Fax :+91-20-27487080


Email :
sales@bjseal.com
 
Quality
 We are maintains ongoing quality assurance checks throughout the manufacturing process.
Read More....

News
BJSEAL is at the forefront of the engineering business and regularly produces press releases we offer to our customers.
Read More....