In order to view this object you need Flash Player 9+ support!

Get Adobe Flash player

Rubber gasket sheet 

Rubber sheeting is required to perform over a wide range of applications and conditions. The following information can be used as a guide to select the correct rubber sheet for your application. Two surface finishes of rubber sheet are available as standard; “Plate”, giving a smooth gloss finish or “Cloth” where an impression of fabric is imparted onto the rubber during manufacture. A Self Adhesive Backing can be added to all rubbers if requested. Other than specified sizes are on request*

BJSEAL Style 2000 NITRILE Rubber rubber gasket Sheet
A high grade Nitrile material at 70NITRILE RUBBER GASKETshore, resistant to many hydrocarbons, fats, oils, greases, hydraulic fluids and chemicals. Cloth reinforcement enhances dimensional stability in flanged gasket applications with high compression loads. Suitable for use in air, hot water, saturated steam, low pressure steam and hydraulic services.
Style 2010 Nitrile with cloth inserted
Style 2020 Nitrile with nylon inserted


Colour : Black
Thickness (mm) :1.0mm to 12.0mm*
Sheet Size : 1.5m wide in 10m rolls*
Finish : Plate Finish
Density (Specific Gravity) : 1.4
Hardness (degree Shore A) : 70 ± 5°
Tensile Strength (Mpa) : 6
Elongation at Break : 300%
Temperature Range Max. : -20°C to +100°C
Abrasion Resistance (mm³) : 300
Tear Resistance (kg/cm) : 14

BJSEAL Style 2100 VITON rubber gasket Sheet Viton is a high grade fully synthetic VITON Rubberfluoroelastomer which has excellent resistance to heat and a wide range of aggressive fuels and chemicals. It also has good resistance to weathering and ozone. Viton is available in a range of different grades for a variety of applications. Viton® rubber sheeting is designed for use in extreme conditions, excellent resistance to chlorinated hydrocarbons, fuels and many acids. Not generally used with ketones, low molecular weight esters and nitro containing compounds
Style 2110 Viton with cloth inserted
Style 2120 Viton with nylon inserted

Colour : Black
Thickness (mm) :1.0mm to 10.0mm*
Sheet Size* : 1.5m wide in 10m rolls*
Finish : Plate Finish
Density (Specific Gravity)g/cm3 : 1.99
Hardness (degree Shore A) : 72 ± 5°
Tensile Strength (Mpa) : 4
Elongation at Break : 165%
Temperature Range Max. : 10°C to +315°C
Viton® is the registered trademark of DuPont Performance elastomers.

BJSEAL Style 2200 EPDM rubber gasket Sheet EPDM (Ethylene Propylene)
is used widely in the EPDM rubberwater industry and is suitable for use with potable water applications offering good in ozone and water resistance. Chemical and ageing characteristics make this rubber ideal for exposed applications.


Colour : Black
Thickness (mm) :1.0mm to 12.0mm*
Sheet Size : 1.5m wide in 10m rolls*
Finish : Plate Finish
Density (Specific Gravity) : 1.25
Hardness (degree Shore A) : 60 ± 5°
Tensile Strength (Mpa) : 5
Elongation at Break : 300%
Temperature Range Max. : -30°C to +100°C
Abrasion Resistance (mm³) : 190
Tear Resistance (kg/cm) : 10


BJSEAL Style 2300 NEOPRENE rubber gasket Sheet Neoprene Rubber Sheeting is 70° shore Neoprene Rubberhardness Commercial Quality Chloroprene (Neoprene) and Styrene Butadiene blended material. Neoprene Rubber is a black chloroprene rubber with good weathering and heat resistance. Neoprenes have moderate resistance to petroleum based fluids. Cloth reinforcement enhances dimensional stability in flanged gasket applications with high compression loads. Suitable for use in air, hot water, saturated steam, low pressure steam and hydraulic services.
Style 2310 Neoprene with cloth inserted
Style 2320 Neoprene with nylon inserted
Style 2330 Neoprene diaphragm sheet

Colour : Black
Thickness (mm) :1.0mm to 12.0mm*
Sheet Size : 1.5m wide in 10m rolls*
Finish : Plate Finish
Density (Specific Gravity) : 1.4
Hardness (degree Shore A) : 70 ± 5°
Tensile Strength (Mpa) : 4
Elongation at Break : 250%
Temperature Range Max. : -20°C to +100°C
Abrasion Resistance (mm³) : 250
Tear Resistance (kg/cm) : 7

BJSEAL Style 2400 SILICONE rubber gasket Sheet Silicone Rubber Sheeting is an extremely Sillicon Rubberresilient, totally synthetic rubber available in a wide range of colours and hardness’s. Silicone displays excellent resistance to heat, weathering, ozone and a wide range of chemicals. It is impervious to UV light, is non toxic, chemically inert and will retain its flexibility and properties over a wide temperature range. colours Available include white, translucent and red.

Colour : Black
Thickness (mm) :1.0mm to 12.0mm*
Sheet Size : 1.5m wide in 10m rolls*
Finish : Plate Finish
Density (Specific Gravity) : 1.25
Hardness (degree Shore A) : 60 ± 5°
Tensile Strength (Mpa) : 5
Elongation at Break : 300%
Temperature Range Max. : -30°C to +100°C
Abrasion Resistance (mm³) : 190
Tear Resistance (kg/cm) : 10

BJSEAL Style 2500_SBR Rubber Gasket Sheet(Styrene-butadiene rubber) A polymer used in the 2500 SBRSBRmanufacture of expanded rubber. It is very economical and possesses no unique chemical resistance properties. SBR rubber can be compounded to provide very fine abrasion, wear, and tensile qualities. SBR can be readily substituted for natural rubber in many applications with significant cost savings. Resilience is about the same as natural rubber. Cloth reinforcement enhances dimensional stability in flanged gasket applications with high compression loads. Suitable for use in air, hot water, saturated steam, low pressure steam and hydraulic services.

Colour : Black,Red
Thickness (mm) :1.0mm to 12.0mm*
Sheet Size : 1.5m wide in 10m rolls*
Finish : Plate Finish
Density (Specific Gravity) : 1.25
Hardness (degree Shore A) : 70 ± 5°
Tensile Strength (Mpa) : 3.2
Elongation at Break : 200%
Temperature Range Max. : -55°C to +90°C
Abrasion Resistance (mm³) : 100
Tear Resistance (kg/cm) : 40


Contact Info
world map

BJSEAL ENGINEERING PVT. LTD.


BR1-350, JAI GANESH VISION
AKURDI, PUNE - 411035
MAHARASHTRA, INDIA.


Phone :+91-20-27483060

Fax :+91-20-27487080


Email :
sales@bjseal.com
 
Quality
 We are maintains ongoing quality assurance checks throughout the manufacturing process.
Read More....

News
BJSEAL is at the forefront of the engineering business and regularly produces press releases we offer to our customers.
Read More....